Eptatech-Stretchable-Electronics

The transfer printing process is explained in the picture below.

Figure 1. – Process in the case of final application on fabric

  1. Ink and thermoplastic glue layers are screen printed on a sacrificial support
  2. The ink layer set is transferred, using a heat press, by activating the thermoplastic glue (current parameters are: 180°C/4 bar/15 sec)
  3. Once at room temperature, the sacrificial support is peeled-off
  4. Final curing is performed (5 min at 150°C for best performances)

Quick contact

Search by product

Pick the required product from the drop-down menu or enter its name directly.