Find the best solution for your every need in the full EPTANOVA products portfolio.

Ultraviolet curing ink with glossy finishing

 

Ultraviolet curing ink with glossy finishing

 

Ultraviolet curing ink with glossy finishing

 

Ultraviolet curing ink with matt finishing

 

Soft touch and good opacity plastisol ink series

 

Ultraviolet curing ink with glossy finishing.

 

Solvent based cellulose ink with semi-glossy finishing

 

Vinyl solvent based ink, with glossy finishing

 

Solvent based vinyl ink with glossy finishing

 

Water base coloures pigments range\

 

Ultraviolet curing ink with glossy finishing

 

Solvent based vinyl ink with glossy finishing.

 

Semi-glossy vinyl ink with very quick drying

 

Solvent based vinyl ink with matt finishing

 

Ultraviolet curing ink with glossy finishing

 

Two-component, epoxy, glossy, opaque ink

 

Acrylic solvent based ink with glossy finishing

 

Thermoformable vinyl-acrylic ink with glossy finishing

 

Solvent based ink with semi-glossy finishing

 

Removable solvent based ink with high opacity.

 

Low Fusion plastisol ink series

 

Series of plastisol inks with dedicated formula guide for the realization of colour references

 

Plastisol ink series with glossy printing finishing, good opacity and soft touch.

 

Cellulosic solvent based fluorescent ink with matt finishing.

 

Series of water based inks for textile printing

 

A complete range of water based inks to achieve special effects, giving character to printed textiles

 

Vinyl fluorescent solvent based ink

 

Water based inks, allowing the realization of prints with bright opaque colours and soft touch.

 

Plastisol ink series with very quick intermediate drying times through flash lamp.

 

Solvent based cellulose ink with semi-glossy finishing

 

Bi-component solvent based ink with glossy finishing

 

Bi-component solvent based ink with glossy finishing

 

Two-component solvent-based ink. Glossy finish.

 

Solvent based vinyl ink with metal effect.

 

Water-based inks for textile screen printing

 

Water-based ink with glossy finishing

 

Opaque water-based inks for textile roll2roll printing. Base and white

 

High concentration pigments to be added to water based binders for textile printing (ECOTEX P, ECOTEX AMC); Transparent water based ink (ECOTEX CONCENTRATO); ready-to-use white ink (ECOTEX BIANCO 2045)

 

Vinyl solvent based ink, with matt finishing

 

A series of PVC-free plastisol inks for textile printing. In compliance with the main ECO-friendly specifications.

 

One and two-component solvent-based ink with glossy finish.

 

One and two-component solvent-based ink with glossy finish.

 

Cellulose semi-glossy mono-component ink.

 

Polyester hexagonal particles, PVC or PS coloured beads with metal, fluorescent or iridescent effect.

 

Vinyl solvent-based ink with glossy finish

 

Invisible inks under natural lighting conditions, with fluorescent properties under certain infra-red waives lenght.

 

Two-component solvent-based ink.

 

Vinyl-acrylic solvent-based ink.

 

Inks that are able to incorporate and store encoded information, then readable with specific MICR (Magnetic Ink Character Recognition) detectors. Depending on the type of information included, magnetic inks can be divided in High-Co (high-coercive) and Low-Co (low-coercive).

 

Water based ink with matt finishing

 

Opaque water-based inks for textile printing. Base and white

 

Vinyl solvent-based inks with glossy finishing

 

Foil for partial hot transfer.

 

Thermoplastic films with patterns for fashion effects and for transfer application onto fabric or leather.

 

Two-component solvent-based ink with glossy finish

 

Polyurethane solvent based ink, with matt-satin finishing

 

Colour shift inks, also called "interferencials" or "optical variables". The inks are capable of changing colour depending on the observation point and the light angle of incidence. 

 

Inks that have a particular brightness when exposed to sunlight, giving a "pearl effect" to the printed surface and the chosen color. 

 

Phosphorescent inks glow in the dark after having been exposed, for a variable period of time, to daylight: in other words, they are able to absorb the brightness and emit light even after the radiation, responsible for the fluorescence, is no longer present.

 

One and two-component solvent-based ink with glossy finish.

 

Substrates to realize transfer packs, polyuretanic films on polyester substrates suitable for carving and heat transfer

 

Auxiliaries products for screen printing

 

ROTOGRIP is a range of inks for rotogravure that combines dynamic management of production process, cost optimization and extreme customization.

 

Solvent-based removable ink with matt finish

 

The scratch-off inks are products able to be removed easily if rubbed with a rigid material, such as a coin. They are very opaque inks, able to completely hide the underlying information until their removal.

 

Two-component solvent-based white ink with matt finishing.

 

Transparent and opaque plastisol bases with different hand touch

 

Plastisol whites inks with different specific features

 

Auxiliaries products for solvent based inks

 

Solvent based products for graphic effects

 

UV formulated products for graphic effects

 

UV-curing adhesive for screen printing

 

Bi-component, transparent ink with acrylic-polyester nature, used as primer for sublimation finishing

 

Auxiliary products to optimize the application of sublimation inks and improve efficiency

 

Water-based pigment bases for the realization of sublimation screen printings. They have to be added to the appropriate bases of the series SUBLISTAR

 

Bases and aqueous emulsions for the optimal printability of sublimation inks onto paper for textile transfer.

 

Off-set inks for the realization of sublimation transfers. SUBLISTAR OFF-SET is based on synthetic resins with high melting point, dissolved into high boiling oils with high pureness

 

Water-based pigment bases for the realization of Flexo and Rotogravure sublimation printing. They have to be added to the appropriate products of the series SUBLISTAR.

 

Vinyl one and two-component solvent-based ink with glossy finishing

 

One and two-component solvent-based ink with glossy finish

 

Water-based adhesive for transfers

 

Viscose textile fibers on paper or polyester substrate

 

Retarders, thickeners, catalysts and powders to obtain special effects with water based inks

 

Water-based high concentration pigments

 

Two-component inks for discharge textile printing

 

Water-based opaque inks for textile printing. Semi-matt finishing

 

Series of water-based opaque and self-curing inks for textile printing. Matt finishing

 

Water-based opaque inks for textile printing. Semi-matt finishing

 

Water based products, eco-friendly, formulated for the textile finishing and the achievement of special effects onto fabrics.

 

Water base transparent inks for textile printing

 

Whites Plastisol phthalates free inks, for textile printing.

 

Phtalates free opaque plastisol inks. Matching System, fluo and process colours, glossy finishing for garment printing. Wide whites inks range.

 

Low environmental impact thinners, adhesion promoters, plasticizers and puff additives for plastisol inks

 

Plastisol inks to achieve special graphic effects such as silver, gold pearl, puff or suede, high thickeness and adhesives for transfer.

 

Two-component inks, based on silicone polymers

 

Reversible thermosensitive inks: when the temperature changes, the pigments from colorful become colorless, then returning to their originl color when recovering the initial temperature.

 

Bi-component solvent based ink with final glossy effect

 

One or two-component solvent-based ink with semi-glossy finish

 

Invisible inks under natural lighting conditions, with fluorescent properties under ultraviolet radiation (365nm or 254nm).

 

Auxiliaries products for UV inks

 

UV varnishes for printing applications

 

One-component solvent-based ink with satinized finish

 

One-component solvent-based ink with glossy finish

 

One-component solvent-based ink with matt finish

 

ECO SOLVENT digital inks designed for use with EPSON DX-4 and DX-5 printheads.

 

ECO SOLVENT digital inks designed for use with EPSON DX-7 printheads.

 

MID SOLVENT digital inks designed for use with EPSON DX-4 e DX-5 printheads.

 

UV digital inks specifically designed for LED technology curing to be used with Epson DX-6 printheads.

 

Sublimatic digital inks designed for printing onto paper, designed for Panasonic printheads.

 

Sublimation digital inks designed for printing onto paper, designed for Panasonic printheads. The series is specifically formulated to be used with DGI 1608 and 1908 equipments.

 

Sublimation inks for direct printing onto fabrics with DX-7 printheads.

 

Sublimatic digital inks designed for printing onto paper, designed for EPSON DX-7 printheads.

 

Sublimatic digital inks designed for printing onto paper, designed for Kyocera printheads.

 

Sublimatic digital inks designed for printing onto paper, designed for Ricoh GEN-4 and GEN-5 printheads.

 

Sublimation digital inks designed for printing onto paper, designed for RICOH GEN-5 printheads. Dedicated to TS500 equipments.

 

Acid inks for digital textile printing, designed for Epson printheads.

 

Two-pack transparent acrylic enamel, high solid

 

Two-pack acrylic sandable filler, for spray coating.

 

Two-pack product based on hydroxylated modified acrylic resins, suitable as an intermediate for water-based or solvent-based decals

 

Modified acrylic thermosetting glossy clearcoat for oven curing

 

Acrylic waterbased clearcoat

 

Acrylic waterbased clearcoat.

 

Product based on modified silicone resins resistant to high temperatures; air and oven drying

 

Product based on modified silicone resins resistant to high temperatures; air and oven drying

 

Two-pack product based on hydroxylated modified acrylic resins, suitable as an intermediate to be coloured

 

Product based on modified solvent-based binders, for heat resistant painting

 

Product based on siliconic resins modified resistant to high temperatures, drying on air and oven.

 

Product based on modified silicone resins resistant to high temperatures; air and oven drying

 

Solvent based modified epoxy ester primer, suitable for air drying and oven curing

 

Coloured or transparent three-pack polyurethane enamel for glass coating with glossy, satin, matt, smooth or embossed finishing

 

Water thinnable monocomponent  product, based on acrylic resins,  oven curing, for roller and spray coating

 

Liquid concentrated solvent dyestuff.

 

Two component epoxy waterbased product.

 

Enamels based on thermoresistant alchidic modified resins, for oven curing, with glossy finishing

 

Water thinnable monocomponent product based on unsaponifiables resins, oven curing, for dip and spray coating

 

Two-pack product based on hydroxylated and acrylic modified resins, for spray coating

 

Low reactivity unsaturated polyester primer-filler, accelerated and UV stabilized.

 

Two component waterbased primer with high elasticity and adhesion.

 

Modified alkyd resin product for oven curing. It is used as an undercoat layer for top coats

 

Products based on polyvinyl resins modified with phenolic

 

Product based on modified silicone resins resistant to high temperatures; air and oven drying

 

Dual Cure photo emulsion suitable to print with plastisol and water based inks

 

Pre-sensitized diazo capillary film for solvent based and plastisol inks applications requiring heavy ink deposits.

 

Conductive inks with relative low conductivity for the realization of printed circuit components even with high-speed printing processes.

 

Water-based catalyst formula to increase the chemical / mechanical strength of the screen printing matrix

 

Water-based catalyst formula to increase the chemical / mechanical strength of the screen printing matrix

 

Water-based catalyst formula to increase the chemical / mechanical strength of the screen printing matrix

 

Selected polyester films range for membrane switches production.

 

CLEANSER is a series of auxiliary products in the REPRO SCREEN range proposed for the detergency and the precautionary scrubbing of the supports which must subsequently be used for the preparation of printing matrices.

 

Dual Cure “multipurpose” photoemulsion, indicated for the preparation of screens for textile/graphic printing.

 

Dual Cure photoemulsion, indicated for the preparation of screens for solvent and UV inks system, good resistance to solvent based inks.

 

Two-component adhesive for the preparation of the matrices

 

Inks used for bonding electrical/electronic components.

 

Polyester films for the realization of user graphical interface components of membrane switches.

 

Dual cure diazo photoemulsions particularly formulated for the preparation of screens to be exposed on Computer to Screen system.

 

Pure polymer photoemulsion suitable for the preparation of screen through exposure with CTS optical systems

 

Dual cure diazo photoemulsion, indicated for the preparation of screens for decal screen printing.

 

Diazo films are direct-positive contact films for ammonia development.

 

Diazo sensitizers are a series of complementary products from the PRE-PRESS range to make light-sensitive photoemulsions and thus allow photochemistry engraving of matrices by UV irradiation.

 

Inks for the realization of electrically insulating protections of printed circuits.

 

Mono and two-components protection varnishes

 

One pot Polymer emulsion (PPE), medium high solids, upright coating quality and good reactivity to UV radiation.

 

Screen printing inks for UV and hot air curing.

 

Conductive inks for the realization of printed tracks, whose resistance varies according to the intensity of the pressure exerted on it.

 

Diazo Polymer emulsion (DPE). The particular choice of raw materials used ensure high levels of quality and perfect image realization, providing good results of sharpness of the designs.

 

GHOST CLEANER is a series of auxiliary products of the REPRO SCREEN range indicated for the active removal of "ghost images" and halos that the inks and emulsions can leave on the fabric even after the recovery operation.

 

GREEN CLEAN is the detergent for the preparation of fabrics.

 

GREEN FIX is a selection of water based catalysts to increase chemical and mechanical resistance of matrices.

 

GREEN GHOST is a product used to remove “ghost images ” from the recovered fabrics .

 

GREEN STRIP is the stripper to remove photo emulsion from screen printing matrices.

 

Two-component polyurethane adhesive suitable for gluing all types of frame: metal, coated-metal and wood.

 

HARDENER 324 is a water based catalyst, that allows to increase the chemical-mechanical resistances of the photo emulsions.

 

Single component solvent based varnish for the masking of the printing frames

 

Chrome-free photoemulsion for the realization of textile rotary screens.

 

Monofilament polyester fabric for screen printing

 

Pure Polymer emulsion (PPE) with positive reactivity to UV radiation that reduces, therefore, the exposure time during the irradiation process.
The possible addition of diazo compounds gives the product an increase of chemical / mechanical resistance by extending the print runs.

 

Diazo traditional photo-emulsion, with violet colour, indicated for the preparation of screens for screen printing with UV and solvent based inks.

 

Dual Cure photo-emulsion, with violet colour, indicated for preparing screens for screen printing with UV and solvent based inks.

 

Adhesives for tables, carpets and pallets for textile printing.

 

Silver based photosensitive films.

 

Polyester high density film for inkjet printing

 

Dual cure diazo photoemulsions indicated for the preparation of screens for textile continuous printing.

 

Dual cure diazo photoemulsions indicated for the preparation of screens for textile continuous printing.

 

Dual cure diazo photoemulsion indicated for the preparation of screens for screen printing of baked clay products.

 

POLISTRIP is a group of auxiliary products of the PRE-PRESS range indicated for the photoemulsions removal from the print matrices. The recovery operation can only be done if the screens have not been catalyzed or protected with reinforcing varnish.

 

Diazo polymer emulsion (DPE) that combines in a single product excellent print quality together with extended mechanical resistance.

 

Chrome-free photoemulsion for the realization of textile rotary screens.

 

Photosensitive lacquer for the realization of micro-punched cylinders for continuous textile printing. To be used with Computer to Screen systems equipped with engraving heads, working with a wave length of 405 nm.

 

Diazo traditional photoemulsion indicated for the preparation of screens for textile continuous printing

 

Photosensitive lacquer for the realization of textile micro-punched cylinders. To be used solely with “LEX” systems, low power laser units.

 

Conductive paints for spray application for antistatic coatings or electromagnetic shielding.

 

Specific lacquer for the realization of textile micro-punched cylinders through laser ablation (CO2) engraving systems.

 

Specific lacquer for the realization of textile micro-punched cylinders through laser ablation (CO2) engraving systems.

 

Concentrated degreaser suitable for detergency and the cleaning of the rotary screens

 

Blue photoemulsion for the realization of micro-punched textile cylinders.

 

Permanent red photoemulsion for the realization of micro-punched textile cylinders.

 

Red photoemulsion for the realization of micro-punched textile cylinders.

 

Single component solvent based varnish for the retouching of the rotary screen

 

Dual Cure photoemulsion indicated for the preparation of screens for textile printing and graphics.

 

Dual Cure diazo photoemulsion, indicated for the preparation of screens for screen printing.

 

Cleaning agent based on soaps and organic solvents for cleaning flat and cylinders matrix

 

Product for retouching the screen frames

 

Water based product for retouching the screen frames

 

High conductivity inks using silver particles as functional material.

 

Inks for electrical protection of copper, pond, silver and gold slopes.

 

Product indicated for the removal of the emulsion residues resistant to the action of the POLISTRIP

 

Product for easy removal of photoemulsions before treatment with the products of the series POLISTRIP

 

Wooden squeegees and elastometric polyurethanic rubber, indicated for screen printing

 

Diazo polymer emulsion (DPE) to be sensitizer with diazo compound. 

 

This products removes the ghost images after the recovery of the screens

 

Two-component adhesive for the preparation of the matrices

 

Two-component adhesive for the preparation of the matrices

 

Inks for manufacturing printed tracks whose resistance varies as the temperature changes to a predetermined temperature threshold, at which the resistance and, consequently, the temperature stabilize.

 

One pot Pure Polymer emusion (PPE), with a high solid content which facilitates relevant thicknesses. Grant high reactivity to UV radiation thus allow consequently the exposure time during the imaging process.

 

Photo-polymer emulsion formulated for high thickness, water based and plastisol inks system

 

Dual Cure photo emulsion formulated for UV, solvent based, plastisol and water based inks system

 

Dual Cure photo-emulsion, with violet colour, indicated for preparing screens for printing with UV, solvent and plastisol inks

 

Diazo standard emulsion (DSE), high solids content, offers an excellent quality level for features and performance.

 

Dual Cure photo emulsion, indicated for plastisol and water based inks system.

 

Dual Cure photoemulsion indicated for the preparation of screens for screen print.

 

Dual Cure photo emulsion indicated for the preparation of screens for textile printing.

 

Dual Cure photo emulsion indicated for the preparation of screens for Textile printing and graphics.

 

Pure polymer photoemulsion suitable for the preparation of screen through exposure with direct projection systems, also indicated for CTS optical systems

 

Photo-polymer emulsion formulated for high thickness, UV, plastisol system inks.

 

Diazo traditional photo-emulsion, indicated for the preparation of screens for screen printing

 

Dual Cure “multipurpose” photo emulsion, indicated for the preparation of screens for textile/graphic printing.

 

Diazo traditional photoemulsion indicated for the preparation of screens for textile screen printing.