Soft touch and good opacity plastisol ink series
Product finder
Find the best solution for your every need in the full EPTANOVA products portfolio.
Series of plastisol inks with dedicated formula guide for the realization of colour references
Plastisol ink series with glossy printing finishing, good opacity and soft touch.
A complete range of water based inks to achieve special effects, giving character to printed textiles
Plastisol ink series with very quick intermediate drying times through flash lamp.
High solid Polyurethane water-based ink series for Polyester fabrics, leather, imitation leather, nylon.
Water-based catalyst formula to increase the chemical / mechanical strength of the screen printing matrix
Water-based catalyst formula to increase the chemical / mechanical strength of the screen printing matrix
Water-based catalyst formula to increase the chemical / mechanical strength of the screen printing matrix
CLEANSER is a series of auxiliary products in the REPRO SCREEN range proposed for the detergency and the precautionary scrubbing of the supports which must subsequently be used for the preparation of printing matrices.
Dual Cure “multipurpose” photoemulsion, indicated for the preparation of screens for textile/graphic printing.
Dual Cure photoemulsion, indicated for the preparation of screens for solvent and UV inks system, good resistance to solvent based inks.
Dual cure diazo photoemulsions particularly formulated for the preparation of screens to be exposed on Computer to Screen system.
Pure polymer photoemulsion suitable for the preparation of screen through exposure with CTS optical systems
Dual cure diazo photoemulsion, indicated for the preparation of screens for decal screen printing.
Diazo sensitizers are a series of complementary products from the PRE-PRESS range to make light-sensitive photoemulsions and thus allow photochemistry engraving of matrices by UV irradiation.
High concentration pigments to be added to water based binders for textile printing (Ecotex P, Ecotex AMC); transparent water based ink (Ecotex Concentrated); ready-to-use white ink (Ecotex White 2045).
One pot polymer emulsion (PPE), medium high solids, upright coating quality and good reactivity to UV radiation.
Series of PVC-free plastisol inks for textile printing. In compliance with the main Eco-Friendly specifications.
GHOST CLEANER is a series of auxiliary products of the REPRO SCREEN range indicated for the active removal of "ghost images" and halos that the inks and emulsions can leave on the fabric even after the recovery operation.
GREEN FIX is a selection of water based catalysts to increase chemical and mechanical resistance of matrices.
Two-component polyurethane adhesive suitable for gluing all types of frame: metal, coated-metal and wood.
HARDENER 324 is a water based catalyst, that allows to increase the chemical-mechanical resistances of the photo emulsions.
Ready-to-use emulsion to use with water based inks, discharge inks, plastisol and silicone inks for textile screen printing.
Fast exposing time, to use also with CTS systems.
Dual cure photo emulsion indicated for the preparation of screens for textile printing and graphics.
Diazo traditional photo-emulsion, with violet colour, indicated for the preparation of screens for screen printing with UV and solvent based inks.
Dual Cure photo-emulsion, with violet colour, indicated for preparing screens for screen printing with UV and solvent based inks.
Clear solvent-based coat that can be peeled off from various substrates once it has dried
Dual cure diazo photoemulsions indicated for the preparation of screens for textile continuous printing.
Dual cure diazo photoemulsions indicated for the preparation of screens for textile continuous printing.
POLISTRIP is a group of auxiliary products of the PRE-PRESS range indicated for the photoemulsions removal from the print matrices. The recovery operation can only be done if the screens have not been catalyzed or protected with reinforcing varnish.
Pure polymer photoemulsion suitable for the preparation of screen through exposure with direct projection systems, also indicated for CTS optical systems.
Photosensitive lacquer for the realization of micro-punched cylinders for continuous textile printing. To be used with Computer to Screen systems equipped with engraving heads, working with a wave length of 405 nm.
Diazo traditional photoemulsion indicated for the preparation of screens for textile continuous printing
Photosensitive lacquer for the realization of textile micro-punched cylinders. To be used solely with “LEX” systems, low power laser units.
Specific lacquer for the realization of textile micro-punched cylinders through laser ablation (CO2) engraving systems.
Specific lacquer for the realization of textile micro-punched cylinders through laser ablation (CO2) engraving systems.
Concentrated degreaser suitable for detergency and the cleaning of the rotary screens
Permanent red photoemulsion for the realization of micro-punched textile cylinders.
Dual cure photoemulsion indicated for the preparation of screens for textile printing and graphics.
Cleaning agent based on soaps and organic solvents for cleaning flat and cylinders matrix
Product indicated for the removal of the emulsion residues resistant to the action of the POLISTRIP
Product for easy removal of photoemulsions before treatment with the products of the series POLISTRIP
Squeegee blades in monolayer or in triple-layer, in two qualities and in six finishing with different hardnesses.
Diazo traditional photo-emulsion, indicated for the preparation of screens for screen printing.
Pad-printing solvent based mono-component and/or bi-component ink, with final glossy effect
Series of water-based opaque and self-curing inks for textile printing. Matt finishing.
Water based products, eco-friendly, formulated for the textile finishing and the achievement of special effects onto fabrics.
Retarders, thickeners, catalysts and powders to obtain special effects with water based inks.
Phtalates free opaque plastisol inks with glossy finishing for garment printing. Matching System, fluo, process colours and a wide white inks range.
Plastisol inks to achieve special graphic effects such as silver, gold, pearl, puff or suede, high thickeness and adhesives for transfer.
Low environmental impact thinners, adhesion promoters, plasticizers and puff additives for plastisol inks
One pot pure polymer emusion (PPE), with a high solid content which facilitates relevant thicknesses. Grant high reactivity to UV radiation thus allow consequently the exposure time during the imaging process.
Dual cure “multipurpose” photo emulsion, indicated for the preparation of screens for textile/graphic printing.
Photo-polymer emulsion formulated for high thickness, water based and plastisol inks system.
Dual cure photo emulsion formulated for UV, solvent based, plastisol and water based inks system.
Dual cure photo-emulsion, with violet colour, indicated for preparing screens for printing with UV, solvent and plastisol inks.
Ready-to-use emulsion to use with water based inks, discharge inks, plastisol and silicone inks for textile screen printing.
Diazo traditional photoemulsion indicated for the preparation of screens for textile screen printing.