Find the best solution for your every need in the full EPTANOVA products portfolio.

Business Brand
Product Brand
EPTATECH

Dual Cure photo emulsion suitable to print with plastisol and water based inks

 

Conductive inks with relative low conductivity for the realization of printed circuit components even with high-speed printing processes.

 

Water-based catalyst formula to increase the chemical / mechanical strength of the screen printing matrix

 

Water-based catalyst formula to increase the chemical / mechanical strength of the screen printing matrix

 

Water-based catalyst formula to increase the chemical / mechanical strength of the screen printing matrix

 

CLEANSER is a series of auxiliary products in the REPRO SCREEN range proposed for the detergency and the precautionary scrubbing of the supports which must subsequently be used for the preparation of printing matrices.

 

Dual Cure “multipurpose” photoemulsion, indicated for the preparation of screens for textile/graphic printing.

 

Dual Cure photoemulsion, indicated for the preparation of screens for solvent and UV inks system, good resistance to solvent based inks.

 

Two-component adhesive for the preparation of the matrices

 

Inks used for bonding electrical/electronic components.

 

Dual cure diazo photoemulsions particularly formulated for the preparation of screens to be exposed on Computer to Screen system.

 

Pure polymer photoemulsion suitable for the preparation of screen through exposure with CTS optical systems

 

Dual cure diazo photoemulsion, indicated for the preparation of screens for decal screen printing.

 

Diazo sensitizers are a series of complementary products from the PRE-PRESS range to make light-sensitive photoemulsions and thus allow photochemistry engraving of matrices by UV irradiation.

 

Inks for the realization of electrically insulating protections of printed circuits.

 

Mono and two-components protection varnishes

 

One pot Polymer emulsion (PPE), medium high solids, upright coating quality and good reactivity to UV radiation.

 

Screen printing inks for UV and hot air curing.

 

Mixers to mix inks, emulsions and other fluid (5 kg or 20 kg).

 

Mixers to mix inks, emulsions and other fluid (5 kg or 20 kg).

 

Conductive inks for the realization of printed tracks, whose resistance varies according to the intensity of the pressure exerted on it.

 

Diazo Polymer emulsion (DPE). The particular choice of raw materials used ensure high levels of quality and perfect image realization, providing good results of sharpness of the designs.

 

GHOST CLEANER is a series of auxiliary products of the REPRO SCREEN range indicated for the active removal of "ghost images" and halos that the inks and emulsions can leave on the fabric even after the recovery operation.

 

GREEN CLEAN is the detergent for the preparation of fabrics.

 

GREEN FIX is a selection of water based catalysts to increase chemical and mechanical resistance of matrices.

 

GREEN GHOST is a product used to remove “ghost images ” from the recovered fabrics .

 

GREEN STRIP is the stripper to remove photo emulsion from screen printing matrices.

 

Two-component polyurethane adhesive suitable for gluing all types of frame: metal, coated-metal and wood.

 

HARDENER 324 is a water based catalyst, that allows to increase the chemical-mechanical resistances of the photo emulsions.

 

Single component solvent based varnish for the masking of the printing frames

 

Chrome-free photoemulsion for the realization of textile rotary screens.

 

Pure Polymer emulsion (PPE) with positive reactivity to UV radiation that reduces, therefore, the exposure time during the irradiation process.
The possible addition of diazo compounds gives the product an increase of chemical / mechanical resistance by extending the print runs.

 

Diazo traditional photo-emulsion, with violet colour, indicated for the preparation of screens for screen printing with UV and solvent based inks.

 

Dual Cure photo-emulsion, with violet colour, indicated for preparing screens for screen printing with UV and solvent based inks.

 

Adhesives for tables, carpets and pallets for textile printing.

 

Dual cure diazo photoemulsions indicated for the preparation of screens for textile continuous printing.

 

Dual cure diazo photoemulsions indicated for the preparation of screens for textile continuous printing.

 

Dual cure diazo photoemulsion indicated for the preparation of screens for screen printing of baked clay products.

 

POLISTRIP is a group of auxiliary products of the PRE-PRESS range indicated for the photoemulsions removal from the print matrices. The recovery operation can only be done if the screens have not been catalyzed or protected with reinforcing varnish.

 

Diazo polymer emulsion (DPE) that combines in a single product excellent print quality together with extended mechanical resistance.

 

Chrome-free photoemulsion for the realization of textile rotary screens.

 

Photosensitive lacquer for the realization of micro-punched cylinders for continuous textile printing. To be used with Computer to Screen systems equipped with engraving heads, working with a wave length of 405 nm.

 

Pure polymer photo-emulsion (PPE) very fast, it can also be used with CTS / DMD optical systems.

 

Diazo traditional photoemulsion indicated for the preparation of screens for textile continuous printing

 

Photosensitive lacquer for the realization of textile micro-punched cylinders. To be used solely with “LEX” systems, low power laser units.

 

Conductive paints for spray application for antistatic coatings or electromagnetic shielding.

 

Specific lacquer for the realization of textile micro-punched cylinders through laser ablation (CO2) engraving systems.

 

Specific lacquer for the realization of textile micro-punched cylinders through laser ablation (CO2) engraving systems.

 

Concentrated degreaser suitable for detergency and the cleaning of the rotary screens

 

Blue photoemulsion for the realization of micro-punched textile cylinders.

 

Permanent red photoemulsion for the realization of micro-punched textile cylinders.

 

Red photoemulsion for the realization of micro-punched textile cylinders.

 

Single component solvent based varnish for the retouching of the rotary screen

 

Dual Cure photoemulsion indicated for the preparation of screens for textile printing and graphics.

 

Dual Cure diazo photoemulsion, indicated for the preparation of screens for screen printing.

 

Cleaning agent based on soaps and organic solvents for cleaning flat and cylinders matrix

 

Product for retouching the screen frames

 

Water based product for retouching the screen frames

 

High conductivity inks using silver particles as functional material.

 

Inks for electrical protection of copper, pond, silver and gold slopes.

 

Product indicated for the removal of the emulsion residues resistant to the action of the POLISTRIP

 

Product for easy removal of photoemulsions before treatment with the products of the series POLISTRIP

 

Squeegee blades in monolayer or in triple-layer, in two qualities and in six finishing with different hardnesses.

 

Diazo polymer emulsion (DPE) to be sensitizer with diazo compound. 

 

This products removes the ghost images after the recovery of the screens

 

Two-component adhesive for the preparation of the matrices

 

Two-component adhesive for the preparation of the matrices

 

Inks for manufacturing printed tracks whose resistance varies as the temperature changes to a predetermined temperature threshold, at which the resistance and, consequently, the temperature stabilize.

 

One pot Pure Polymer emusion (PPE), with a high solid content which facilitates relevant thicknesses. Grant high reactivity to UV radiation thus allow consequently the exposure time during the imaging process.

 

Photo-polymer emulsion formulated for high thickness, water based and plastisol inks system

 

Dual Cure photo emulsion formulated for UV, solvent based, plastisol and water based inks system

 

Dual Cure photo-emulsion, with violet colour, indicated for preparing screens for printing with UV, solvent and plastisol inks

 

Diazo standard emulsion (DSE), high solids content, offers an excellent quality level for features and performance.

 

Dual Cure photo emulsion, indicated for plastisol and water based inks system.

 

Dual Cure photoemulsion indicated for the preparation of screens for screen print.

 

Dual Cure photo emulsion indicated for the preparation of screens for textile printing.

 

Dual Cure photo emulsion indicated for the preparation of screens for Textile printing and graphics.

 

Pure polymer photoemulsion suitable for the preparation of screen through exposure with direct projection systems, also indicated for CTS optical systems

 

Photo-polymer emulsion formulated for high thickness, UV, plastisol system inks.

 

Diazo traditional photo-emulsion, indicated for the preparation of screens for screen printing

 

Dual Cure “multipurpose” photo emulsion, indicated for the preparation of screens for textile/graphic printing.

 

Diazo traditional photoemulsion indicated for the preparation of screens for textile screen printing.